Cisco WS-C3550-24-FX-SMI - Catalyst 3550 100BASE-FX Switch Guía de instalación Pagina 93

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 150
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 92
3-5
Catalyst 3550 Multilayer Switch Hardware Installation Guide
78-11358-03
Chapter 3 Troubleshooting
Diagnosing Problems
Amber System LED
Nonfatal or fatal POST error
detected.
Check the port LEDs as
described in Table 3-1 to see
which POST test failed.
Switch placed in error-disabled
state after GBIC is inserted
Bad or non-Cisco-approved GBIC. Remove the GBIC module from
the switch, and replace it with a
Cisco-approved module. Use
the errdisable recovery cause
gbic-invalid global
configuration command to
verify the port status, and enter a
time interval to recover from the
error-disable state.
Refer to the Catalyst 3550
Multilayer Switch Command
Reference for information on the
errdisable recovery command.
Table 3-2 Common Problems and Their Solutions (continued)
Symptom Possible Cause Resolution
Vista de pagina 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 149 150

Comentarios a estos manuales

Sin comentarios