Cisco 6050 Guía de usuario descargar pdf (Pagina 26)

McAfee® IntruShield® IPS 4.1 Attaching Cables to the M-6050

M-6050 Sensor Product Guide Cabling the Response port

Name Setting

Baud rate 38400

Number of bits 8

Parity None

Stop bits 1

Flow Control None

Cabling the Response port

The sensors’ Response ports are used to send responses to attacks; when operating

in TAP or SPAN mode, for example, you cannot inject response packets via a tap.

You must use a Response port.

► To connect the Response port to a network device:

1 Plug a Cat-5e Ethernet cable into the Response port (labeled Rx on the sensor

front panel).

2 Connect the other end of the cable to the network device (for example, hub,

switch, router) through which you want to respond to attacks.

Cabling the Fail-Open port

Fail-open functionality for the GE Monitoring ports is accomplished using the standard

Gigabit Fail-open Bypass Kit, sold separately. (Both Copper and Optical versions are

available.)

Fail-open functionality for the 10 Gigabit Monitoring ports is accomplished using the

standard 10 Gigabit (Optical) Fail-open Bypass Kit, sold separately.

For more information, see the documentation that accompanies the Kit.

Cabling the Management port

The Management (Mgmt) port is used for communication with the Manager server.

► To connect the sensor to the Manager server:

1 Plug a Cat-5e Ethernet cable into the Management port (labeled Mgmt on the

sensor front panel).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 34 35

Sin comentarios

Cisco 6050 Guía de usuario Pagina 26