Cisco Catalyst 2900 Series XL Especificaciones Pagina 225

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 322
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 224
8-33
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
78-6511-06
Chapter 8 Configuring VLANs
Load Sharing Using STP
Load Sharing Using STP Path Cost
You can configure parallel trunks to share VLAN traffic by setting different path costs on a trunk and
associating the path costs with different sets of VLANs. The VLANs keep the traffic separate; because
no loops exist, STP does not disable the ports; and redundancy is maintained in the event of a lost link.
In Figure 8-6, trunk ports 1 and 2 are 100BASE-T ports. The path costs for the VLANs are assigned as
follows:
VLANs 2 through 4 are assigned a path cost of 30 on trunk port 1.
VLANs 8 through 10 retain the default 100BASE-T path cost on trunk port 1 of 19.
VLANs 8 through 10 are assigned a path cost of 30 on trunk port 2.
VLANs 2 through 4 retain the default 100BASE-T path cost on trunk port 2 of 19.
Figure 8-6 Load-Sharing Trunks with Traffic Distributed by Path Cost
Step 16
interface fa0/1 Enter interface configuration mode, and define the interface to set the STP
port priority.
Step 17
spanning-tree vlan 8 9 10
port-priority 10
Assign the port priority of 10 for VLANs 8, 9, and 10.
Step 18
end Return to global configuration mode.
Step 19
interface fa0/2 Enter interface configuration mode, and define the interface to set the STP
port priority.
Step 20
spanning-tree vlan 3 4 5 6 port
priority 10
Assign the port priority of 10 for VLANs 3, 4, 5, and 6.
Step 21
exit Return to privileged EXEC mode.
Step 22
show running-config Verify your entries.
Command Purpose
16591
Switch 1
Switch 2
Trunk port 1
VLANs 2-4 (path cost 30)
VLANs 8-10 (path cost 19)
Trunk port 2
VLANs 8-10 (path cost 30)
VLANs 2-4 (path cost 19)
Vista de pagina 224
1 2 ... 220 221 222 223 224 225 226 227 228 229 230 ... 321 322

Comentarios a estos manuales

Sin comentarios