Cisco Catalyst 2900 Series XL Especificaciones descargar pdf (Pagina 230)

8-38

Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide

78-6511-06

Chapter8 Configuring VLANs

How the VMPS Works

Default VMPS Configuration

Table 8-13 shows the default VMPS and dynamic port configuration on client switches.

Configuring Dynamic VLAN Membership

You must enter the IP address of the Catalyst 5000 switch or the other device acting as the VMPS to

configure the Catalyst 2900 XL or Catalyst 3500 XL switch as a client. If the VMPS is being defined for

a cluster of switches, enter the address on the command switch.

Beginning in privileged EXEC mode, follow these steps to enter the IP address of the VMPS:

Table 8-13 Default VMPS Client and Dynamic Port Configuration

Feature Default Configuration

VMPS domain server None

VMPS reconfirm interval 60 minutes

VMPS server retry count 3

Dynamic ports None configured

Command Purpose

Step 1

configure terminal Enter global configuration mode.

Step 2

vmps server ipaddress primary Enter the IP address of the switch acting as the primary VMPS server.

Step 3

vmps server ipaddress Enter the IP address for the switch acting as a secondary VMPS server.

You can enter up to three secondary server addresses.

Step 4

end Return to privileged EXEC mode.

Step 5

show vmps Verify the VMPS server entry.

In the display, check the VMPS Domain Server field.

1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 321 322

Sin comentarios

Cisco Catalyst 2900 Series XL Especificaciones Pagina 230