Cisco SCE 1000 2xGBE Guía de usuario descargar pdf (Pagina 159)

100

101

Chapter 6 Control Configuration

SNTP

SCE 1000 2xGBE Release 2.0.10 User Guide

OL-7117-02 6-13

Setting the Time Zone

To set the current time zone:

Step 1 From the SCE 1000(config)# prompt, type clock timezone <zone>

<hours>, where <zone> is the name of the time zone and <hours> is the offset from

GMT.

EXAMPLE:

The following example shows how to set the time zone to Pacific Standard Time with an offset of

10 hours behind GMT.

SCE 1000(config)#clock timezone PST –10

SCE 1000(config)#

Note

You can configure time zones that do not differ from GMT by a multiple of one hour. Consult the CLI

Command Reference (on page A-1) regarding the clock timezone global configuration command.

Removing Current Time Zone Setting

To remove the current time zone setting:

Step 1 From the SCE 1000(config)# prompt, type no clock timezone and press

Enter.

The default time zone is UTC (GMT).

EXAMPLE:

The following example shows how to remove the time zone setting.

SCE 1000(config)#no clock timezone

SNTP

The Simple Network Timing Protocol (SNTP) is a simple solution to the problem of

synchronizing the clocks in the various elements of the network. SNTP provides access to a time

source via the network. The system clock and calendar are then set in accordance with this

external source.

There are two options for the SNTP client. These functions are independent, and the system

employ either one or both.

• Multicast SNTP client: Listens to SNTP broadcasts and updates the system clock accordingly.

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 489 490

Comentarios a estos manuales

Sin comentarios

Cisco SCE 1000 2xGBE Guía de usuario Pagina 159

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco SCE 1000 2xGBE