Cisco SCE 1000 2xGBE Guía de usuario descargar pdf (Pagina 321)

100

101

Appendix A

LineCard Interface Configuration Mode Commands

SCE 1000 2xGBE Release 2.0.10 User Guide

OL-7117-02 A-51

Flags = RST flag when value = 1 and all ACK flag values

Direction = downstream

Traffic counter = counter2

Action = Block

The actions performed will be counting and blocking

SCE 1000 (config if)# traffic-rule rule2 IP-addresses subscriber-side all

network-side all-but 10.10.10.0/24 protocol TCP ports subscriber-side 100

network-side 100:150 flags RST 1 ACK all direction downstream traffic-

counter counter2 action block

EXAMPLE 2

This example creates the following traffic rule:

Name = rule3

IP addresses: all

Protocol = IS-IS

Direction = upstream

Traffic counter = none

Action = ignore (required since traffic-counter = none)

Since it is not TCP/UDP, port and flags are not applicable.

The only action performed will be Ignore.

SCE 1000 (config if)# traffic-rule rule3 IP-addresses all protocol IS-IS

direction upstream traffic-counter none action ignore

EXAMPLE 3

The following example demonstrates how to delete all traffic rules.

SCE 1000(config if)# no traffic-rule all

[no] ip tunnel mode

Configures recognition of L2TP tunnels and skipping into the internal IP packet. User the no

form of this command to disable tunnel recognition.

An IP tunnel is mutually exclusive with using VLAN for classification.

default disabled (no)

Authorization admin

Mode LineCard Interface Configuration

XAMPLE:

The following example enables recognition of L2TP tunnels.

SCE 1000(config if)#ip tunnel L2TP skip

1 2 ... 316 317 318 319 320 321 322 323 324 325 326 ... 489 490

Comentarios a estos manuales

Sin comentarios

Cisco SCE 1000 2xGBE Guía de usuario Pagina 321

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco SCE 1000 2xGBE