Cisco SCE 1000 2xGBE Guía de usuario Pagina 358

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 490
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 357
Appendix A
Privileged Exec Mode Commands
SCE 1000 2xGBE Release 2.0.10 User Guide
A-88 OL-7117-02
show hosts
Displays the default domain name, the address of the name server, and the content of the host
table.
Authorization admin
Mode Privileged EXEC
E
XAMPLE:
The following example shows the domain and hosts configured.
SCE 1000#show hosts
Default domain is cisco.com
Name/address lookup uses domain service
Name servers are 10.1.1.60, 10.1.1.61
Host Address
---- -------
PC85 10.1.1.61
SCE 1000#
show interface FastEthernet slot-number/interface-number
Displays the details of a FastEthernet Interface.
Authorization admin
Mode Privileged EXEC
P
ARAMETERS
slot-number The number of the identified slot. Enter a value of 0.
interface-number FastEthernet interface number 0, 1 or 2.
E
XAMPLE:
The following example shows the FastEthernet details.
SCE 1000#show interface FastEthernet 0/0
ip address: 10.1.6.145
subnet mask: 255.255.0.0
Configured speed: auto, configured duplex: auto
AutoNegotiation is On, link is Up, actual speed: 100, actual duplex: half
SCE 1000#
SCE 1000#show interface FastEthernet 0/1
Configured speed: auto, configured duplex: auto
AutoNegotiation is On, link is Up, actual speed: 100Mb/s, actual duplex:
full
Bandwidth: 100000 Kbps, Burst-size: 5000 bytes
SCE 1000#
Vista de pagina 357
1 2 ... 353 354 355 356 357 358 359 360 361 362 363 ... 489 490

Comentarios a estos manuales

Sin comentarios