Cisco SCE 1000 2xGBE Guía de usuario Pagina 187

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 490
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 186
Chapter 6 Control Configuration
Failure Recovery Mode
SCE 1000 2xGBE Release 2.0.10 User Guide
OL-7117-02 6-41
The figure below, illustrates the Cisco Enterprise MIB structure.
Figure 6-3: Service Control MIB Structure
Loading the MIB Files
The SCE proprietary MIB uses definitions that are defined in other MIBs, such as Pcube MIB
(pcube.mib), and the SNMPv2-SMI. Therefore, the order in which the MIBs are loaded is
important. To avoid errors, the MIBs must be loaded in the proper order.
To load the MIBs:
Step 1 Load the SNMPv2-SMI.
Step 2 Load the SNMPv2-TC.
Step 3 Load pcube.mib.
Step 4 Load pcubeSEMib.mib.
Failure Recovery Mode
The failure-recovery operation-mode command defines the behavior of the system
after boot resulting from failure. The system may return to operational mode, or remain not
operational.
The default value is operational.
[no|default] failure-recovery operation-mode
Vista de pagina 186
1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 489 490

Comentarios a estos manuales

Sin comentarios