Cisco SCE 1000 2xGBE Guía de usuario descargar pdf (Pagina 258)

100

101

Chapter 10 Troubleshooting

GBE Interfaces Connectivity

SCE 1000 2xGBE Release 2.0.10 User Guide

10-10 OL-7117-02

GBE Interfaces Connectivity

In general, the case where no traffic is coming out of the SCE 1000 is often caused by link

problems or GBE interface configuration. Note that in some cases, the problem which seems as a

transmit problem could be in the Rx (no traffic is being received by the SCE 1000 or there is

actually no traffic on the line, which could be a normal situation).

In CLI commands of GigabitEthernet interfaces, # stands for the number of the interface. This can

be 1 or 2.

Table 10-4 Network Interfaces Connectivity

Symptom How to look for the

specific cause

Possible Cause Resolution

Interface connectivity problem

GE interface

link LED is off

CLI commands:

• show interface

GigaBitEthernet

0/# counters

Check printout of this

command for: “In good

unicast packet” and “Out

unicast packet”. These

counters should be

constantly incrementing.

• show interface

GigaBitEthernet

0/#

• GigabitEthernet interfaces

auto-negotiation may be

incorrectly configured

• Check auto-

negotiation

configuration in the

SCE Platform and

in its and peers.

• Physical connection broken • Check / reconnect

the optical cable to

the GBE port

• Check / replace the

optical cable

• Check / replace the

cable

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 489 490

Comentarios a estos manuales

Sin comentarios

Cisco SCE 1000 2xGBE Guía de usuario Pagina 258

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco SCE 1000 2xGBE