Cisco 3002 - VPN Hardware Client Guía de usuario descargar pdf (Pagina 114)

12 Administration

12-6

VPN 3002 Hardware Client User Guide

Shutdown without automatic reboot = Shut down the VPN 3002; that is, bring the system to a halt so

you can turn off the power. Shutdown terminates all sessions and prevents new user sessions (but

not administrator sessions). While the system is in a shutdown state, the

SYS LEDs blink on the

front panel.

Cancel a scheduled reboot/shutdown = Cancel a reboot or shutdown that is waiting for a certain time

or for sessions to terminate. (This is the default selection if a reboot or shutdown is pending.)

Configuration

Click a radio button to select the configuration file handling at reboot. These selections apply to reboot

only. You can select only one option.

Save the active configuration at time of reboot = Save the active configuration to the CONFIG file, and

reboot using that new file.

Reboot without saving the active configuration = Reboot using the existing CONFIG file and without

saving the active configuration. (This is the default selection.)

Reboot ignoring the Configuration file = Reboot using all the factory defaults; i.e., start the system as if

it had no

CONFIG file. You will need to go through all the Quick Configuration steps described in

the VPN 3002 Getting Started manual, including setting the system date and time and supplying an

IP address for the Ethernet 1 (Private) interface, using the system console. This option does not

destroy any existing

CONFIG file, and it does not reset Administrator parameter settings.

When to Reboot/Shutdown

Click a radio button to select when to reboot or shutdown. You can select only one option.

Now = Reboot or shutdown as soon as you click Apply. (This is the default selection.)

Delayed by [NN] minutes = Reboot or shutdown NN minutes from when you click Apply, based on

system time. Enter the desired number in the field; the default is

10 minutes. (FYI: 1440 minutes =

24 hours.)

At time [HH:MM] = Reboot or shutdown at the specified system time, based on a 24-hour clock. Enter

the desired time in the field. Use 24-hour notation and enter numbers in all positions. The default is

10 minutes after the current system time.

Wait for sessions to terminate (don’t allow new sessions) = Reboot or shutdown as soon as the last

session terminates, and don’t allow any new sessions in the meantime. If you (the administrator) are

the last session, you must log out for the system to reboot or shutdown.

Apply / Cancel

To take action with the selected options, click Apply. The Manager returns to the main Administration

screen if you don’t reboot or shutdown now.

To cancel your settings on this screen, click

Cancel. The Manager returns to the main Administration

screen. (Note that this

Cancel button does not cancel a scheduled reboot or shutdown.)

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 219 220

Comentarios a estos manuales

Sin comentarios

Cisco 3002 - VPN Hardware Client Guía de usuario Pagina 114

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco 3002 - VPN Hardware Client