Cisco 3002 - VPN Hardware Client Guía de usuario Pagina 115

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 220
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 114
Administration | Ping
12-7
VPN 3002 Hardware Client User Guide
Administration | Ping
This screen lets you use the ICMP ping (Packet Internet Groper) utility to test network connectivity.
Specifically, the VPN3002 sends an ICMP
Echo Request message to a designated host. If the host is
reachable, it returns an
Echo Reply message, and the Manager displays a Success screen. If the host is
not reachable, the Manager displays an
Error screen.
You can also
Ping hosts from the Administration | Sessions screen.
Figure 12-7: Administration | Ping screen
Address/Hostname to Ping
Enter the IP address or hostname of the system you want to test. (If you configured a DNS server, you
can enter a hostname; otherwise, enter an IP address.) Maximum is 64 characters.
Ping / Cancel
To send the ping message, click Ping. The Manager pauses during the test, which may take a few
moments; please wait for the operation to finish. The Manager then displays either a
Success or Error
screen; see below.
To cancel your entry on this screen, click
Cancel. The Manager returns to the main Administration screen.
Success (Ping)
If the system is reachable, the Manager displays a Success screen with the name of the tested host.
Figure 12-8: Administration | Ping | Success screen
Continue
To return to the Administration | Ping screen, click Continue.
Vista de pagina 114
1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 219 220

Comentarios a estos manuales

Sin comentarios