Cisco 3002 - VPN Hardware Client Guía de usuario descargar pdf (Pagina 62)

7 IP Routing

7-2

VPN 3002 Hardware Client User Guide

Configuration | System | IP Routing | Static Routes

This section of the Manager lets you configure static routes for IP routing.

Figure 7-2: Configuration | System | IP Routing | Static Routes screen

Static Routes

The Static Routes list shows manual IP routes that have been configured. The format is [destination

network address/subnet mask -> outbound destination]

; e.g., 192.168.12.0/

255.255.255.0 -> 10.10.0.2

. If you have configured the default gateway, it appears first in the

list as

[Default -> default router address]. If no static routes have been configured, the list

shows

--Empty--.

Add / Modify / Delete

To configure and add a new static route, click Add. The Manager opens the Configuration | System | IP

Routing | Static Routes | Add

screen.

To modify a configured static route, select the route from the list and click

Modify. The Manager opens

the

Configuration | System | IP Routing | Static Routes | Modify screen. If you select the default gateway, the

Manager opens the

Configuration | System | IP Routing | Default Gateways screen.

To delete a configured static route, select the route from the list and click

Delete. There is no

confirmation or undo. The Manager refreshes the screen and shows the remaining static routes in the

list. You cannot delete the default gateways here; to do so, see the

Configuration | System | IP Routing |

Default Gateways

screen.

Reminder: The Manager immediately includes your changes in the active configuration. To save the active

configuration and make it the boot configuration, click the

Save Needed icon at the top of the Manager

window.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 219 220

Sin comentarios

Cisco 3002 - VPN Hardware Client Guía de usuario Pagina 62