Cisco 3002 - VPN Hardware Client Guía de usuario Pagina 196

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 220
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 195
A Errors and troubleshooting
A-2
VPN 3002 Hardware Client Getting Started
buffers, timers, etc., which help Cisco support engineers diagnose the problem. In case of a crash, we
ask that you send this file when you contact Cisco for assistance. to view the
CRSHDUMP.TXT file, see
Administration | File Management | View, and click View Saved Log Crash Dump File.
Configuration files
The VPN 3002 saves the current boot configuration file (CONFIG) and its predecessor (CONFIG.BAK)
as files in flash memory. These files may be useful for troubleshooting. See
Administration | File
Management
for information on managing files in flash memory.
LED indicators
LED indicators on the VPN 3002 are normally green or flashing amber. LEDs that are solid amber or off
may indicate an error condition.
Contact Cisco support if any LED indicates an error condition.
VPN 3002 LEDs (front)
The LEDs on the front of the VPN 3002 are:.
VPN 3002 LEDs (rear)
The LEDs on the rear of the VPN 3002 indicate the status of the Private and Public Interfaces.
LEDs on front of unit
LED State Explanation
PWR green Unit is on and has power.
off Unit is powered off.
SYS flashing amber Unit is performing diagnostics.
solid amber Unit has failed diagnostics.
green Unit is operational.
VPN off No VPN tunnel exists.
amber Tunnel has failed.
green Tunnel is established.
LED Indicator (Rear) Explanation
Green
Interface is connected to the network.
OFF
Interface is not connected to the network.
Flashing amber Traffic is traveling across the interface.
Vista de pagina 195
1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 219 220

Comentarios a estos manuales

Sin comentarios