Cisco 3002 - VPN Hardware Client Guía de usuario descargar pdf (Pagina 180)

14 Using the Command Line Interface

14-2

VPN 3002 Hardware Client User Guide

Telnet or Telnet/SSL access

To access the CLI via a Telnet or Telnet/SSL client:

1 Enable the Telnet or Telnet/SSL server on the VPN 3002. (They are both enabled by default on the

private network.) See the

Configuration | System | Management Protocols | Telnet screen on the Manager.

2 Start the Telnet or Telnet/SSL client, and connect to the VPN 3002 using these parameters:

Host Name or Session Name = The IP address on the VPN 3002 Private interface; e.g., 10.10.147.2

Port

= Telnet (default Telnet port is 23, Telnet/SSL port is 992)

Terminal Type = VT100 or ANSI

Telnet/SSL only: If the client offers it, enable both

SSL and SSL Only.

3 The VPN 3002 displays a login prompt.

Starting the CLI

You start the CLI by logging in.

CLI login usernames and passwords for both console and Telnet access are the same as those configured

and enabled for administrators. See the

Administration | Access Rights | Administrators screen. By default,

only

admin is enabled.

This example uses the factory-supplied default

admin login and password. If you have changed them,

use your entries.

At the prompts, enter the administrator login name and password. Entries are case-sensitive.

Password: admin (The CLI does not show your entry.)

The CLI displays the opening welcome message, the main menu, and the

Main -> prompt.

Welcome to

Cisco Systems

VPN 3002 Hardware Client

Command Line Interface

1) Configuration

2) Administration

3) Monitoring

4) Save changes to Config file

5) Help Information

6) Exit

Main -> _

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 219 220

Sin comentarios

Cisco 3002 - VPN Hardware Client Guía de usuario Pagina 180