Select the channel ID to which the channel settings are to
be applied, from the drop-down list. The option is
available only when the individual selection mode is
activated.
Select the appropriate phone model from the drop-down
list. The user can define new phone models, by defining
new settings in this page and giving a new name in the
editable phone model drop-down list. By default, there
are 9 cases listed in this box; each case can be tried by
the user depending on the PBX and the phone models.
The cases listed are as shown below:
Case1: This configuration can be tried for Avaya IP
Office PBX for Digital Lines.
Case2: This configuration can be tried for NEC,
Panasonic PBX and all other PBXs, which are not
listed in any of the cases available.
Case3: This configuration can be tried for Ericsson
PBX, Nortel Meridian with phones of M32xx, and
Fujitsu PBX.
Case4: This configuration can be tried for Avaya
Definity 2 wire.
Case5: This configuration can be tried for Siemens,
Alcatel, Nortel, Norstar etc.
Case6: This configuration can be tried for E1 /PRI
lines.
Case7: This configuration can be tried for silence
activated recording.
Select the appropriate voice format from the drop-down
list. This option allows the user to select between file
formats for recording voice files.
Comentarios a estos manuales