Cisco Digital Video Recorder in Stand-Alone Mode Manual de usuario descargar pdf (Pagina 55)

55 DGVox 8 Management Console Configuration Guide

Chapter 1 - Management Console

Confidential and Proprietary Information of Vox Spectrum. Ltd.

TAB LE 23: VOIP- GE NER AL SE TTI NGS

Field

Description

License

Channel No

Select the channel number from the drop-down list. This

is the number of channels for which the license is

available.

Index

Type the channel index number. This is to set the starting

channel to be displayed in the DGVox GUI.

For e.g.:-If there are 8 Digital channels and 8 IP channels

in the DGVox application, and you want to make the first

8 channels as IP and the next 8 as Digital, you need to

do the following.

Type the Channel index as 1 in the VOIP settings and as

9 in the digital settings. Then, you will get the first 8

channels set as IP and the next 8 set as digital.

General

PBX Type

Select the PBX type to which DGVox is connected, from

the drop-down list.

The options are: NORTEL, AVAYA, and CISCO.

If NORTEL is selected, the Port Info is IP Phone Port

and LPTS Port.

If AVAYA is selected, the Port Info is changed to CS

Port and RAS Port.

If CISCO is selected, the Port Info is changed to PORT.

Media Forwarding IP

Type the media forwarding IP address. This is the IP

address of the network card connected with a cross cable

from the IPX board.

Recorder IP

Displays the default IP address of the system. This IP is

used for internal signaling purposes.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 139 140

Sin comentarios

Cisco Digital Video Recorder in Stand-Alone Mode Manual de usuario Pagina 55