Cisco WS-X4604-GWY - VoIP Gateway Especificaciones descargar pdf (Pagina 164)

C-4

Cisco Catalyst 4000 Access Gateway Module Installation and Configuration Note

OL-3008-01

Appendix C Connector and Cable Specifications

Cable and Adapter Specifications

Figure C-3 Identifying a Rollover Cable

Connecting to a PC

Use the supplied thin, flat, RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-9 female DTE adapter to

connect the console port to a PC running terminal-emulation software. Table C-4 lists the pinouts for the

console port, the RJ-45-to-RJ-45 rollover cable, and the RJ-45-to-DB-9 female DTE adapter.

Connecting to a Terminal

Use the thin, flat, RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-25 female DTE adapter to connect the

console port to a terminal. Table C-5 lists the pinouts for the console port, the RJ-45-to-RJ-45 rollover

cable, and the RJ-45-to-DB-25 female DTE adapter.

Note The RJ-45-to-DB-25 female DTE adapter is not supplied with the switch. You can order a

kit (part number ACS-DSBUASYN=) containing this adapter from Cisco.

Pin 1

H10632

Pin 8

Pin 1 on one connector and

pin 8 on the other connector

should be the same color.

Table C-4 Console Port Signaling and Cabling Using a DB-9 Adapter

Console

Port (DTE)

RJ-45-to-RJ-45

Rollover Cable

RJ-45-to-DB-9

Terminal Adapter

Console

Device

Signal RJ-45 Pin RJ-45 Pin DB-9 Pin Signal

RTS 1 8 8 CTS

Not connected 2 7 6 DSR

TxD 3 6 2 RxD

GND 4 5 5 GND

GND 5 4 5 GND

RxD 6 3 3 TxD

Not connected 7 2 4 DTR

CTS 8 1 7 RTS

1 2 ... 159 160 161 162 163 164 165 166

Sin comentarios

Cisco WS-X4604-GWY - VoIP Gateway Especificaciones Pagina 164