Cisco OL-4015-08 Manual de usuario Pagina 661

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 678
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 660
1013
Cross-Platform Release Notes for Cisco IOS Release 12.0S
OL-1617-14 Rev. Q0
Caveats
Resolved Caveats—Cisco IOS Release 12.0(30)S
Conditions: This symptom is observed on a Cisco 12000 series when the same ACL is applied to
more than one port. Note that aggregate counters work fine. The symptom does not occur when the
ACL is applied to a single port.
Workaround: There is no workaround.
CSCef59140
Symptoms: The protocol may go down on random link bundles that are part of the multilink Frame
Relay (MFR) protocol on a Cisco 12000 series that is configured with a channelized OC-12 DS1
line card.
Conditions: This symptom is observed on a Cisco 12000 series that runs Cisco IOS
Release 12.0(28)S after you have reloaded the router.
Workaround: Enter the shutdown interface configuration command followed by the no shutdown
interface configuration command on the affected link bundles.
CSCef59275
Symptoms: Prefixes are rewritten over a FRR backup tunnel, causing traffic to drop from the tunnel.
Conditions: This symptom is observed when a point of local repair (PLR) runs Cisco IOS
Release 12.0(29)S and the merge point (MP) runs a release earlier than Release 12.0(29)S or
Release 12.2S.
Workaround: Run Release 12.0(29)S or a later release on the MP.
CSCef59972
Symptoms: An RP crashes when you remove class maps from a policy map.
Conditions: This symptom is observed on a Cisco 12000 series that runs a Cisco IOS interim release
for Release 12.0(30)S.
Workaround: There is no workaround.
CSCef61054
Symptoms: When you configure an inter-area LSP, metrics, attributes, or both are not signaled,
causing the LSP to follow an unexpected and possibly undesired path.
Conditions: This symptom is observed on a Cisco router that is configured for MPLS TE.
Workaround: There is no workaround.
CSCef61641
Symptoms: A change in the controller state does not affect the subrate interface state.
Conditions: This symptom is observed on a Cisco 7500 series that is configured with an
PA-MC-2T3+ port adapter.
Workaround: There is no workaround. However, you can synchronize the interface with the
controller by entering the shutdown interface configuration command followed by the no shutdown
interface configuration command on the affected interface.
CSCef62246
Symptoms: An Auto-RP mapping entry may expire when hardware acceleration is enabled on the
VRF interfaces or when a static VRF RP statement is configured on the PE router.
Conditions: This symptom is observed on a Cisco 12000 series that functions as a PE router.
Workaround: Disable hardware acceleration or define a static VRF RP statement with an ACL.
Vista de pagina 660
1 2 ... 656 657 658 659 660 661 662 663 664 665 666 ... 677 678

Comentarios a estos manuales

Sin comentarios