Cisco 7600-ES20-GE3CXL-RF - Ethernet Services 20G Line Card Switch Manual de usuario Pagina 166

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 398
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 165
612
Caveats for Cisco IOS Release 12.2(33)SRD through 12.2(33)SRD8
OL-10394-05 Rev. R0
1. Aggregate label should not be using the VPN CAM.
2. The recirculation VLAN has the wrong VPN number.
Workaround: Manually correct the wrong mls vlan-ram entry.
Further Problem Description: If there are multiple aggregate labels on a given VRF, there might be
a chance of seeing this issue.
CSCsw37635
Symptoms: A Cisco 10000 series router may crash at issu_print_memory while doing a loadversion.
Conditions: The active router crashes when doing load version with “debug issu all” turned on.
Workaround: Do not turn on ISSU debug.
CSCsw43211
Symptoms: Following errors are seen:
%IDMGR-3-INVALID_ID: bad id in id_to_ptr (bad id) (id: 0xFFFFFFFF) -Traceback=
60476EBC 60477400 60491664 616C5834 616C7EEC 61AB72CC 61AC2E64 61AC2EBC 60FE4274
60FDEFA4 60FD4180 60FD4874 60FD4BBC 60FD275C 60FD27A0 60FC8F74
Conditions: This has been seen on a Cisco 7200 after upgrading to Cisco IOS Release
12.2(33)SRC2.
Workaround: There is no workaround.
CSCsw43272
Symptoms: The VPDN user does not take LNS-assigned IP addresses when using the DHCP pool.
Conditions: The symptom is observed whenever the DHCP server is unavailable or when the DHCP
pool is exhausted.
Workaround: Use IP pool instead of DHCP pool.
CSCsw43499
Symptoms: Accounting start sent on DHCP OFFER rather than ACK.
Conditions: This issue can cause accounting irregularities if the DHCP process does not complete.
For example, with active-active Cisco Intelligent Services Gateway (ISG) redundancy, two DHCP
OFFERs will be sent, but only one will be accepted. Since accounting records are generated for both
OFFERs, they will be duplicates of each other.
Workaround: There is no workaround.
CSCsw43948
Symptoms: A Cisco 3845 router that is running Cisco IOS Release 12.4(13) may bounce the frames
(which are not destined for itself) on the same interface that receives them.
Conditions: The symptom is observed if there is bridging configured on an ethernet subinterface in
the following way:
ip cef ! bridge irb ! interface GigabitEthernet0/1 no ip address no sh ! ! interface
GigabitEthernet0/1.100 encapsulation dot1Q 100 ip address x.x.x.x x.x.x.x no ip
redirects no ip unreachables no ip proxy-arp ip rip advertise 10 ! interface
GigabitEthernet0/1.509 encapsulation dot1Q 101 bridge-group 1
Workaround: If the command bridge-group 1 is removed from the sub-interface, it will behave as
expected.
CSCsw47475
Symptoms: Cisco 7600 router has multiple E1s that randomly flap.
Conditions: Occurs on a router with RSP720, SIP-200 and 8xCHT1/E1 SPA installed.
Vista de pagina 165
1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 397 398

Comentarios a estos manuales

Sin comentarios