Cisco 7600-ES20-GE3CXL-RF - Ethernet Services 20G Line Card Switch Manual de usuario Pagina 259

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 398
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 258
705
Caveats for Cisco IOS Release 12.2(33)SRD through 12.2(33)SRD8
OL-10394-05 Rev. R0
Symptoms: OSPF routes are not populated in the Routing Information Base (RIB) with the next hop
as traffic engineering (TE) tunnels.
Conditions: Occurs when multiple TE tunnels are configured and the tunnels come up or are shut/no
shut simultaneously.
Workaround: Shut/no shut tunnels one at a time.
CSCsk91176
Symptoms: When the crashinfo is being written to a disk, the IPC timeout messages is displayed,
and line cards are reset.
Conditions: This problem occurs on Cisco 10000 PRE3 and PRE4 when crash file is being written.
Workaround: There is no workaround.
CSCsk91267
Symptoms: There are two symptoms:
1. When you reset a WS-X6708-10GE card, you may see the following message:
%OIR-SW2_SP-6-PWRFAILURE: Module 3 is being disabled due to power converter failure
0x3
2. When you turn off a power supply or due to a temporary power supply glitch, user may see a
similar message:
00:09:16: %OIR-SP-6-PWRFAILURE: Module 1 is being disabled due to power convertor
failure 0xF
OR
%OIR-SP-6-PWRFAILURE: Module 2 is being disabled due to power convertor failure 0x8
When you turn on a power supply, you do not see "power supply 1 online" message.
Conditions: Occurs when a WS-X6708-10GE card is reset or when power is interrupted.
Workaround: There is no workaround.
CSCsk92854
Symptoms: Traceback may be seen while testing L2TP scaling 32k functionality on a Cisco 10000
series router.
Conditions: The symptom is seen with scaling scenarios and with a Cisco 10000 series router.
Workaround: There is no workaround.
CSCsk93241
Cisco IOS Software Multi Protocol Label Switching (MPLS) Forwarding Infrastructure (MFI) is
vulnerable to a Denial of Service (DoS) attack from specially crafted packets. Only the MFI is
affected by this vulnerability. Older Label Forwarding Information Base (LFIB) implementation,
which is replaced by MFI, is not affected.
Cisco has released free software updates that address this vulnerability.
This advisory is posted at http://www.cisco.com/warp/public/707/cisco-sa-20080924-mfi.shtml
CSCsk94179
Symptom: Connectivity problems are observed for IPv6 client, which obtained IPv6 prefix via
DHCP for Virtual Access interface, due to incorrect static routes in the routing table for the assigned
IPv6 prefix.
Conditions: Occurs with IPv6 prefix delegation via DHCP, when client moves from one interface to
another.
Workaround: None
Vista de pagina 258
1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 397 398

Comentarios a estos manuales

Sin comentarios