Cisco 7600-ES20-GE3CXL-RF - Ethernet Services 20G Line Card Switch Manual de usuario Pagina 345

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 398
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 344
791
Caveats for Cisco IOS Release 12.2(33)SRD through 12.2(33)SRD8
OL-10394-05 Rev. R0
%SYS-2-CHUNKBADFREEMAGIC: Bad free magic number in chunk header, chunk 6DF6E48 data
6DF7B48 chunk_freemagic EF430000 -Process= "Check heaps", ipl= 0, pid= 5,
-Traceback= 0x140C170 0x1E878 0x1EA24 0x1B4AC 0x717DB8 chunk_diagnose, code = 2 chunk
name is PPTP: pptp_swi
current chunk header = 0x06DF7B38 data check, ptr = 0x06DF7B48
next chunk header = 0x06DF7B70 data check, ptr = 0x06DF7B80
previous chunk header = 0x06DF7B00 data check, ptr = 0x06DF7B10
Conditions: Issue has been seen on Cisco 7200 router with NPE-G2 configured for L2TP and
running Cisco IOS Release 12.4(15)T3 and Cisco IOS Release 12.4(15)T4.
Workaround: There is no workaround.
CSCso48665
Symptoms: With COPP configured, L2 traffic coming from VPLS SVI is punted to the RP and is
subject to the control plane policy.
Conditions: The symptom is observed on a Cisco 7600 series router with both VPLS SVI and COPP
configured.
Workaround: There is no workaround.
CSCso49388
Symptoms: Router crashes on attaching the policy which contains "queue-limit" configuration in the
input direction of any interface.
Conditions: Occurs on Cisco 7200 routers with NPEG1 processor and Cisco 7301 routers.
Workaround: There is no workaround.
CSCso49598
Symptoms: Standby reloads continuously when "MAXINT" is used with "int ran" to create logical
interfaces using.
Conditions: Occurs in SSO mode.
Workaround: Avoid giving MAXINT as range.
Further Problem Description: At a stretch, only 1000 logical interfaces could be created through
interface range. Due to some wrap-around problem, it was not showing error when MAXINT was
given as option and starts creating these many interfaces which are much beyond the
MAXINTERFACES supported by any existing platform. It will lead to MEMORY getting exhausted
and different after effects as standby reload.
CSCso50347
Symptoms: A router may crash after the command show ip /jointfilesconvert/422273/bgp l2vpn vpls all prefix- list is issued.
Conditions: The symptom is observed when the show ip /jointfilesconvert/422273/bgp l2vpn vpls all prefix-list command is
used with a configured prefix-list.
Workaround: Use the show ip /jointfilesconvert/422273/bgp l2vpn vpls all command.
CSCso50363
Symptoms: When AAA authentication is from RADIUS and RADIUS debugs are enabled, the
password (except for last two characters) for the users trying to login to the box appears in debug
messages.
Conditions: Occurs under the following scenario:
1) Configure RADIUS server.
2) Configure AAA authentication for login with RADIUS.
3) Enable RADIUS debugs.
Vista de pagina 344
1 2 ... 340 341 342 343 344 345 346 347 348 349 350 ... 397 398

Comentarios a estos manuales

Sin comentarios