Cisco 7600-ES20-GE3CXL-RF - Ethernet Services 20G Line Card Switch Manual de usuario Pagina 381

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 398
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 380
827
Caveats for Cisco IOS Release 12.2(33)SRD through 12.2(33)SRD8
OL-10394-05 Rev. R0
Class cpp-default police cir 100000 bc 93750 be 187500 conform-action drop exceed-action drop
violate-action drop
router#sh class-map cpp-default
Class Map match-all cpp-default (id 4) Match access-group name cpp-default
router#sh access-lists cpp-default Extended IP access list cpp-default 10 permit ip
any any (454914 matches)
Workaround: Remove the CoPP config, let the card boot up, and once the card is up, Apply the CoPP
configuration again.
Further Problem Description: Further debugging has revealed that CoPP drops the packet. More
specifically the "cpp-default" class that matches any IP address is the class which is hit and then the
packet is dropped.
CSCsq88522
Symptoms: Convergence time is greater than expected in high availability SSO mode.
Conditions: This issue occurs only when the no aaa new- model command is enabled for high
available sessions such as PPPoSerial that do not need external AAA server support. This issue is
observed with more than 2000 serial interfaces.
Workaround: There is no workaround.
CSCsq89329
Symptoms: There is a leak in system resources (SHDB).
Conditions: This symptom occurs when a large number of PPPoE sessions are churned.
Workaround: There is no workaround.
CSCsq91348
Symptoms: There may be a crash during a service/user-profile authorization when removing taps
through SNMP.
Conditions: The symptom is observed when making a service/user-profile authorization while
removing a tap file through SNMP.
Workaround: If possible, do not make authorizations when removing taps through SNMP.
CSCsq91788
Symptoms: A Cisco 10000 series router crashes on loading negative configurations.
Conditions: This symptom happens when loading provisioning/unprovisioning LS and/or PW
connection scale configurations from TFTP while executing the show xconnect all detail command
on other console.
Workaround: There is no workaround.
CSCsq91960
Symptoms: VRF may not get deleted if the VRF NAME size is 32 characters on a dual RP HA/SSO
router.
Conditions: This symptom occurs when adding a VRF with 32 characters on a DUAL RP HA router.
(In some releases a VRF name with more than 32 characters will get truncated to 32.) The following
may occur:
- There may be a DATA CORRUPTION ERRMSG. - While deleting this 32 character length VRF,
VRF will fail to get deleted completely with an ERRMSG on active.
Workaround: There is no workaround.
CSCsq93004
Vista de pagina 380
1 2 ... 376 377 378 379 380 381 382 383 384 385 386 ... 397 398

Comentarios a estos manuales

Sin comentarios